Off Topic > General Discussion
Shelf life of SRB's
bknight:
I noticed a member in Cosmoquest ask a question is the SRB' of the SLS perhaps out out of date. So, what is the shelf-life o them in the humid environment of Florida?
JayUtah:
Humidity is good for the propellant grains. They actually have a shorter shelf-life here in Utah because here they dry out and start to crack. The grain is not very different from a heavy-duty tire. It looks and feels like sturdy rubber. And for all intents and purposes, it is. It's a polyurethane binder.
Humidity wreaks havoc on the steel casing, however. Especially if it's also exposed to saline sea spray. The fit tolerances are on the order of 0.030 inch, but corrosion affects the bonding ability of the putty in the field joints.
Non-climate factors affecting shelf life are just pure gravity. No matter how you store segments, over time gravity pulls them and the propellant grains out of shape.
bknight:
--- Quote from: JayUtah on April 21, 2022, 02:41:21 PM ---Humidity is good for the propellant grains. They actually have a shorter shelf-life here in Utah because here they dry out and start to crack. The grain is not very different from a heavy-duty tire. It looks and feels like sturdy rubber. And for all intents and purposes, it is. It's a polyurethane binder.
Humidity wreaks havoc on the steel casing, however. Especially if it's also exposed to saline sea spray. The fit tolerances are on the order of 0.030 inch, but corrosion affects the bonding ability of the putty in the field joints.
Non-climate factors affecting shelf life are just pure gravity. No matter how you store segments, over time gravity pulls them and the propellant grains out of shape.
--- End quote ---
Good information but what approximate timeline does that give for the current SRB of the current SLS assuming they get all the fuel loading issues fixed in a month or so?
Do your buddies at Morton believe the SRB's won't have an issue firing this year?
JayUtah:
Shouldn't be a problem in any way for an assembled SRB. It's only the unassembled segments that have to be cared for in a humid environment. Once they're stacked, all the corrodible surfaces are covered.
bknight:
--- Quote from: JayUtah on April 24, 2022, 11:29:51 AM ---Shouldn't be a problem in any way for an assembled SRB. It's only the unassembled segments that have to be cared for in a humid environment. Once they're stacked, all the corrodible surfaces are covered.
--- End quote ---
Cool should the joints/gasket/putty be acceptable ala Challenger (though obviously not cold).
Navigation
[0] Message Index
[#] Next page
Go to full version