Author Topic: Restoration of an AGC  (Read 622 times)

Offline MartinC

  • Mercury
  • *
  • Posts: 14
Restoration of an AGC
« on: January 07, 2019, 12:36:30 PM »
I haven't seen a post on this so that I'd flag it up.

There's a series of 5 videos on Youtube covering early attempts to restore an Apollo Guidance Computer to working order (minus the rope memory). I found it a fascinating story which also gave me an insight into the remarkable engineering that went into the computer. Here's the link to part one https://youtu.be/2KSahAoOLdU. Or if you prefer not to click on random youtube links, search for the CuriousMarc channel.

Offline Obviousman

  • Mars
  • ***
  • Posts: 444
Re: Restoration of an AGC
« Reply #1 on: January 07, 2019, 03:06:15 PM »
There was another one on a person who found (IIRC) 16 of the memory modules that appear to have been used / destined for AS-202.

He built a rig so that he could actually read the code that was used.

Offline Kiwi

  • Mars
  • ***
  • Posts: 426
Re: Restoration of an AGC
« Reply #2 on: January 08, 2019, 01:54:11 AM »
The following typescript might be useful. Filmed or videoed in back-and-white in the olden days of television, this is a quaintly amusing programme to watch but it has some incredibly good information for those who don't know much about the AGC. It has blackboards and chalk in place of graphics, and shows engineers who are as stiff as a board and look utterly terrified to have a movie or TV camera pointing at them — a bit like possums caught in the headlights or bad actors in a B-grade horror movie.

Spacecraft Films DVD Set — Mission to the Moon — Disc 1

Computer For Apollo

0:00:00   Chapter 1.
0:00:02   John Fitch:  These test engineers are checking out a sophisticated collection of telescopes, gyroscopes and electronics for Project Apollo.  This guidance and navigation system will be mounted in an Apollo spacecraft, to aid our three astronauts on their voyage to the moon and return.
0:00:20   Fitch:  The miniaturised computer at the very heart of this system is our story today on Science Reporter.
0:00:29   NASA Presents
0:00:33   Science Reporter
0:00:37   Computer For Apollo
0:00:41   Reporter:  John Fitch, MIT
0:00:47   Fitch:  Hello, I'm John Fitch, MIT Science Reporter.  Today we're at the MIT Instrumentation Laboratory, which has been given design responsibility for this guidance and navigation system, which will direct our Apollo spacecraft on the way to the moon and back.
0:01:04   Fitch:  At one time, the direction of the rising sun or perhaps a winding riverbed was all that man needed in his restless search for new land.  Centuries later the quadrant and the magnetic compass guided his way, even across the open sea, even after familiar landmarks had long since disappeared.
0:01:23   Fitch:  But today we speak of traversing a million miles of empty space, where there is no north nor south, no rising nor setting sun, not even any up or down.  It's an extremely complicated path requiring many, many measurements and millions of calculations.
0:01:41   Fitch:  As you can see from this Apollo flight plan, there are several critical manoeuvres that have to be performed.  After the Apollo spacecraft reaches its earth orbit, it must be injected into a translunar trajectory at just the right place in time and space.
0:01:58   Fitch:  Someone has compared it to shooting at a moving target from a revolving platform, which is mounted on a train, which is going around a curve.
0:02:08   Fitch:  Then at the half-way point, along about here, the programmed course must be examined for errors and possibly a mid-course correction made.  There are many other similar manoeuvres, and to learn about the guidance and navigation system which will make this possible, we talk with Mr Eldon Hall, Deputy Associate Director of the Instrumentation Lab.
0:02:30   Eldon Hall:  The guidance and navigation system consists of two measurement elements, controls, the computer, and the computer display and control.  The inertial measurement unit, shown up here but normally down at the back, consists of gyros and accelerometers.  It measures the angles and velocity of the spacecraft in this fashion.
0:02:56   Hall:  The spacecraft rotates and the inertial measurement unit holds the reference, so the angles can be measured.  The sextant is an instrument very similar to that used by the sailors to navigate on the surface of the earth.
0:03:10   Fitch:  Now what kind of a problem might you have to solve on the way to the moon?
0:03:14   Hall:  The most basic problem is to determine the position at any point in time, and that can be illustrated in these charts.  The sextant shown here represents the spacecraft, and to determine the position an angle must be measured, between a point on the earth and a star.  And you can see that as you move away from the earth, this angle would narrow down, thus giving the distance between the earth and the spacecraft.
0:03:48   Hall:  The astronaut first positions the spacecraft so that a point on the earth, a landmark, is visible through the sextant.  Then he positions the sextant angle so that the star is superimposed upon this landmark.
0:04:05   Fitch:  Now what kind of a landmark might this be?
0:04:07   Hall:  This one is San Francisco Bay, as you can see here.  However, the Great Lakes, or Cuba, or Cape Cod, the tip of Florida — any of these points make suitable landmarks.
0:04:20   Fitch:  Then through some system of mirrors you actually superimpose the star on that feature.
0:04:24   Hall:  That's right.  The mirrors inside the sextant will bring the star within the field of view so that we can superimpose it on the landmark.
0:04:33   Fitch:  Now how is this angle actually measured?
0:04:36   Hall:  It's done automatically by the computer.  The astronaut must first identify to the computer the star and the landmark he is planning to use.  Then, as he's positioning the spacecraft and the sextant, the computer is measuring the angle between the two.
0:04:54   Hall:  When the astronaut is satisfied that the star is superimposed upon the landmark, he pushes the Mark button, telling the computer to record these angles and the time of the measurement.  From that information the computer can compute the position of the spacecraft in space.
0:05:04   Chapter 2.
0:05:11   Fitch:  Well, now that you know the position, what can you do about it if it isn't right?
0:05:15   Hall:  The computer can position the spacecraft, turn on the motors and steer it, and shut the motors off.
0:05:23   Fitch:  So you'll be coasting on a new and corrected path.
0:05:26   Hall:  That's right.
##########
0:05:27   Fitch:  To see the Apollo guidance and navigation system in operation, we visited the Systems Test Laboratory, and talk with Mr Ramon Alonso, Assistant Director of the Instrumentation Laboratory.
0:05:39   Ramon Alonso:  One of the interesting aspects of the guidance system is the way in which the astronaut controls the guidance equipment through the computer.  And he does so by means of the display and keyboard, which is a subsystem.
0:05:52   Alonso:  There are two instances of the display and keyboard.  One is with the rest of the navigation equipment in the lower equipment bay, and the other is near the couches where the astronauts can operate the computer without leaving their couches.
0:06:04   Alonso:  The system of codes used is reasonably simple.  It consist of a numeric verb and a numerical noun.
0:06:12   Fitch:  These are little sentences made of numbers?
0:06:14   Alonso:  Essentially, that illustrates it.  An example of it might be a verb 16, which is Continu­ous Display, in decimal, and a noun, which is Time.  I pick these, and they're at work.   I've now told the computer what I want, but I have not yet told it to go ahead and do what I want.
0:06:34   Alonso:  When I press Enter, the computer proceeds to display time, and it does so, giving me  times from launch, perhaps, in hours and hundredths of hours, 98.56 hours from launch.  And it also gives me a fine view of the low order part of the time in seconds and hundredths of seconds.  That is useful occasionally.
0:06:55   Fitch:  I should think it around launch time would be interesting.
0:06:57   Alonso:  Yes.  The computer will continue to display this information until told otherwise, and it is told otherwise by another verb.  In this case the verb is Terminate —  34.  It's now forgotten that command.
0:07:11   Alonso:  Another example of the use of the computer might be to position the optics.  Now, that is something that can be done manually and usually would be, but it affords us a good view as to how the computer is operated.
0:07:22   Alonso:  The optics are now pointing in a certain direction and I want to change that direction to another target.  And I will invoke a verb which is Point, verb 41, and a noun, which is Optics, noun 55.
0:07:34   Fitch:  Point the telescope.
0:07:36   Alonso:  Point the telescope.  When I press Enter, the computer then proceeds to request the angle to which I wish the optics pointed.
0:07:43   Fitch:  Well, the numbers have changed and now they're flashing, aren't they?
0:07:46   Alonso:  That's right.  The flashing indicates that action is requested of the operator, and the verb and noun have changed to tell the operator what it is that is expected of him.
0:07:54   Alonso:  Verb 21 is Load, load the first component, first angle.  And noun 57 — it used to be 55 — is the angle.  Fifty-five was the telescope and 57 is the angle which the telescope makes.  In this case the angle I want is 180 degrees.  And I enter that, and now it asks for the second angle.
0:08:13   Fitch:  Verb 22.  I see.
0:08:15   Alonso:  Second angle is plus 325.  Now when I press Enter, the camera, which will come close to the eyepiece, will see the telescope slew and point to another target.
0:08:30   Alonso:  As you can see, the crosshairs were lined up on the edge of the rightmost of the two targets, and the computer is now driving the optics telescope, with relation to the spacecraft, and it's aligning it on the rightmost of this pair of targets.  Now you can see the crosshairs right in the middle of the target.
0:08:49   Alonso:  Suppose now that we had done the optical sighting by hand rather than by the computer, then we'd be wanting to inform the computer that we are on target.  This is part of the procedure that is done when star sightings are made, as Mr Eldon Hall mentioned previously.
0:09:05   Alonso:  That is done by means of a Mark button, which is located in the lower equipment bay.  When the telescope is on target, the astronaut presses the Mark button and the computer changes the display to Display — that's the verb — Mark Information, number 56.  And what it displays are the two angles that the telescope is making and the time at which that measurement was made.  Notice that these angles are very close to the ones that were commanded originally in our earlier effort.
0:09:34   Alonso:  This information is part of what is necessary for the computer to then estimate the present position and velocity of the spacecraft.  To estimate what the velocity correction is that ought to be performed, and then to execute that velocity correction.
##########
0:09:50   Fitch:  To learn more about the remarkable little computer at the heart of the guidance and navigation system, we talk with Mr Albert Hopkins, Assistant Director of the [MIT] Instrumentation Laboratory.
0:10:01   Hopkins:  This computer is similar to its ground-based big brothers that are dominating our lives so much today, in that it's fundamentally a high-speed adding machine, with the additional feature of having a memory into which it can write results and some which it can take data, very much as an accountant has his ledger.
0:10:08   Chapter 3.
0:10:24   Hopkins:  And also it has a self-contained list of instructions, analogous to an accountant's training, so that this tells the computer what to do in sequence.  If we look over here I can show you more about how the computer operates.
0:10:40   Hopkins:  The adding machine of this computer is a high-speed arithmetic unit which carries out the fundamental arithmetic processes.  All of the complex operations that we've seen today can be broken down into long lists of arithmetic.
0:10:55   Fitch:  I see.
0:10:58   Hopkins:  The arithmetic unit receives its data from a memory divided into two sections and it puts its results back into the erasable portion of that memory.  This is the portion which is similar to the accountant's ledger.
0:11:10   Fitch:  What is the fixed memory?
0:11:12   Hopkins:  The fixed memory is unique to the space age.  It is a memory which cannot be written into by the arithmetic unit and it contains information which must last the entire mission.  It's here for safety.
0:11:23   Fitch:  The location of stars and things it wouldn't want to forget.
0:11:26   Hopkins:  That's right.  This contains a list of instructions which are fed one at a time to the sequence generator which generates all of the controls necessary to operate the entire computer.
0:11:38   Hopkins:  Input data which comes from the angle-measuring devices that we saw earlier, or the keyboard, comes in through input conditioning circuits and is available in the erasable memory.
0:11:48   Hopkins:  The arithmetic unit can operate upon this input data and compute results designed to be output.  These results are placed in a particular portion of the erasable memory where they are sent to output conditioning circuits, out to other instruments which need this data, such as for instance the displays or, perhaps, a rocket motor.
0:12:13   Fitch:  When you say this computer is very much like land-based computers, and yet I think of them as occupying whole bays of equipment.  You've got all of this squeezed into a little box.  How did you do that?
0:12:23   Hopkins:  Miniaturising a computer like this requires a judicious choice among many quantities.  It's first necessary to minimise the number of circuits which are used.  It's necessary to minimise the size of the components which you use, and it's necessary to package them as tightly as possible.
0:12:44   Hopkins:  Now this must not be carried too far.  If it's carried to far it can endanger the reliability of the computer, so that a compromise must be sought.
0:12:52   Fitch:  Now what kinds of circuits are involved?
0:12:55   Hopkins:  In the memory and also in the power supplies and in the input/output of the computer, conventional components are used, with the exception of the fixed memory, a piece of which we see here.  This fixed memory is actually composed of magnetic cords with wires woven in and out — sewn in with a pattern, for the information here is in the patterns of the sewing.
0:13:18   Fitch:  I see.
0:13:19   Hopkins:  The remainder of the computer — the arithmetic unit, the sequence generator, the so-called connective tissue — the logic section, so-called, of the computer is made up of a single type of unit.  This is a micro-circuit gate.  Forty-three hundred of these are used in the computer to make up this entire segment.
0:13:40   Hopkins:  These are packaged together tightly — they fit in a fairly small space and are interconnected in separate modules in one side of the computer.
##########
0:13:51   Fitch:  The Apollo computers are manufactured by the Raytheon Company in Waltham, Massachusetts.  The computer itself consists of two trays, one containing logic modules, the other memory modules.
0:14:04   Fitch:  To learn how these modules are put together, we talk with Mr Jack Poundstone, Raytheon's Apollo engineering manager.
0:14:12   Poundstone:  In this room, John, we run all of the electrical components through a screening and burning process.  You know there are over 30,000 parts that go together to make this machine.
0:14:23   Poundstone:  Every part is put through an electrical test and then a series of environmental stresses.  Now, as an example, this girl is placing the micrologic units into a fixture that will be used in this centrifuge.
0:14:37   Poundstone:  Here the fixture is spun at a very high speed and 20,000 g's of force is placed on each component.
0:14:43   Fitch:  That's a lot more than it will ever experience, isn't it?
0:14:45   Poundstone:  Yes, that's true, but we put more forces on, more stresses than we really expect, to ensure the high reliability.
0:14:51   Fitch:  So this is really sort of a torture chamber.
0:14:53   Poundstone:  That's right.  In addition, we run all the parts through a leak test, to make sure there is no leaks in the can.  The part is put into a high-pressure helium tank, and if there is a leak, the helium will be forced into the can.
0:15:05   Chapter 4.
0:15:08   Poundstone:  Then we put it in a vacuum chamber and evacuate and test for the amount of helium coming out.
0:15:14   Poundstone:  In the final phase of the screening and burning process, the girl puts the parts, as she's doing here, into a test socket.  Then those parts are placed on this burning rack.
0:15:28   Poundstone:  Here they will be operated for almost a week at a over-voltage stress condition.
0:15:34   Fitch:  You actually are operating them.
0:15:35   Poundstone:  Yes, we are operating the parts.  Now any failure, any significant failure of any of our tests is cause for rejection of the entire lot of 5,000 parts.
0:15:46   Poundstone:  After we've ensured that we have good components, then we want to make a module.
0:15:50   Poundstone:  Now, the little cans, here, are placed in these holes in a component holder.  Then we take a matrix, which is a complex wiring pattern.  It's placed on the back, and the wires are folded over and welded to the leads of the micrologic unit itself.  I'd like to show you now, how we make a matrix.
0:16:15   Poundstone:  Here we see an operator who is placing a piece of Mylar insulator that has been heated on both sides, and this insulator has previously had a pattern of holes punched onto it.  Now this is placed on this longitudinal wire winder.  Now as the piece advances, strips of nickel ribbon are laid down in a longitudinal direction on the Mylar.
0:16:39   Poundstone:  Next, it's taken to the vertical wire winder.  Here the operator is placing it on the machine, and as the drum rotates, wires are laid down on the opposite side of the Mylar in a vertical direction.  The wires will be laying down right over the areas where the holes have been punched.
0:16:57   Fitch:  Some running one way on one side and others running the other way on the other side.
0:17:00   Poundstone:  That's right, John.  Now the next operation is to perform the welding.  This is done on a automatic welding machine.  With this machine we are advancing the matrix underneath these weld heads, and whenever a hole appears under a weld head the weld is commanded to drop and perform a weld, and this makes a feed-through connection from one side of the insulator to the other.
0:17:27   Poundstone:  In the final operation, this girl uses a cutting tool to remove the excess pieces of wire, to give us the final configuration of our precise wiring pattern.
0:17:41   Fitch:  This matrix, then, is the wiring that sort of connects one little micro-electronic circuit to another.
0:17:47   Poundstone:  That's right, John.  This wiring diagram shows you how the matrix can be used to interconnect the micrologic elements.  See here, a wire will run from this can, down here were it's welded through to the other side, run down, break out to another can, and up here to another.
0:18:03   Fitch:  I see, yes.

Continued next post...
« Last Edit: January 08, 2019, 02:59:33 AM by Kiwi »
Don't criticize what you can't understand. — Bob Dylan, “The Times They Are A-Changin'” (1963)
Some people think they are thinking when they are really rearranging their prejudices and superstitions. — Edward R. Murrow (1908–65)

Offline Kiwi

  • Mars
  • ***
  • Posts: 426
Re: Restoration of an AGC
« Reply #3 on: January 08, 2019, 01:55:05 AM »
Continued:—

0:18:04   Poundstone:  Now after that operation, the operator can now take the matrix, fold it and cement it to the component holder.  Then the little micrologic elements themselves will be placed in the holes and we're ready to send the wires down and make a weld.
0:18:23   Poundstone:  After completing that operation, the entire assembly is then put into this metal header.  Now this header provides the structure for the assembly and it has a row of male pins here and the leads for the matrix will be welded to the pins.
0:18:39   Fitch:  So that one logic stick can be connected to another one.
0:18:42   Poundstone:  That's right.  Let's take a look at how the operators do this operation in detail.
0:18:48   Poundstone:  This operator is loading the little micrologic elements into the component holder.  Note that she takes each one and dips it in a little adhesive before she puts it into the holder.
0:19:00   Fitch:  I see.  So it's really fastened in place.
0:19:02   Poundstone:  That's right, John.  Now she's ready to weld the wires to the leads coming out of the can.
0:19:08   Fitch:  You don't solder them, you actually weld these wires?
0:19:10   Poundstone:  They are welded.  Now she takes her little pair of tweezers and properly aligns the wire to the pin of the can.  When the alignment is right, she then makes the weld.  Now that little flash you saw there was when the weld was actually made.
0:19:26   Poundstone:  After that matrix welding is completed, she's ready to place the assembly into the header.
0:19:33   Fitch:  It actually does fit in that little space.
0:19:35   Poundstone:  Yes, she very gently forces it in, and she's ready now to weld the matrix wires on to the pins of the header.  On completion of that operation we now have an electrically completed module.
0:19:49   Poundstone:  A test man will now take this module and run an electrical test.  He plugs the module into a special test socket, and then this special piece of equipment will electrically energise all of the circuits to ensure that they are properly working.  The information for the test is stored on a piece of paper tape.
0:20:02   Chapter 5.
0:20:10   Fitch:  After this testing, then, this logic stick is ready for the computer.
0:20:14   Poundstone:  No, there's one more stage, John, and that's the potting of the module.
0:20:17   Fitch:  What do you mean by potting?
0:20:19   Poundstone:  Well, the potting is this plastic coating that provides a covering for the wiring in the component.  Now the module is ready to be plugged into the logic tray assembly.
0:20:28   Fitch:  That's number 38 and there are all these other modules too.  They might be a little different.
0:20:32   Poundstone:  That's right.
0:20:33   Fitch:  What about the memory module?
0:20:35   Poundstone:  Well, the memory modules of the computer are made using a basic component which is a doughnut-shaped magnetic core.  Now this core is placed into a component holder like so.  Now after the component holder has been completely loaded with cores, we're then ready to do the wiring.
0:20:55   Poundstone:  In order to perform the wiring operation, we store about 20 feet of wire in this needle.  See how that wire comes out of there?
0:21:02   Fitch:  Uh-huh.
0:21:03   Poundstone:  Now the operator will take the core-holder and pass the needle through the core, around to the other side, and then weave it back through, in different positions.  Now let's watch how the girls do this operation in a little more detail.
0:21:20   Poundstone:  Now here we have a pair of girls who are wiring the address wiring of the core module.  Now they pass the wire back and forth, stored in the needle, and put it through the cores in a particular wiring pattern.  Now each time a wire goes through, they must very carefully wrap the wire around one of those little nylon pins.  As you can see, what that does is pull the wire away from the centre of the core to allow room to pass the needle through again.
0:21:49   Fitch:  I see.  Now these address wires go to every single core?
0:21:54   Poundstone:  That's right.  Now when the wire is completely weaved into the rope, it must be terminated on a little spudder terminal.  Now the girl strips the insulation from the wire and very carefully wraps it around the pin.  Then they use a magnifying glass to inspect their work.
0:22:12   Poundstone:  Now the fence wiring information or the wiring that contains the program of the fixed memory, is performed by using this machine.   The machine indexes to a particular location of the core, and then the girl passes the needle through the aperture and provides the wire to go through the right core.
0:22:34   Fitch:  She doesn’t have to think about which core goes through next.
0:22:37   Poundstone:  No, the machine does that for her.  Now note, each time the wire passes through, that little aperture jogs down and pulls the wire around one of the nylon pins.  When she passes the needle through she will trip the switch with the needle, which causes a tape-reader to advance — there's the tape-reader — and that in turn causes the core plane to move its position.
0:23:03   Poundstone:  Now after all the wiring is completed, these nylon pins that were used to temporarily hold the wire, can now be removed.  Next we must press the wires very gently down into place, so we will be able to fold up the whole assembly.
0:23:18   Poundstone:  Now this operator is folding the core plane into a sandwich-type construction and laying them into the header of the module.  Now we are ready for a electrical test.  We must ensure that every wire in every component are properly located.
0:23:35   Poundstone:  The operator puts the module into this piece of special test equipment, and a program stored on paper tape is then used to exercise the module.
0:23:45   Fitch:  This is certainly a complicated-looking maze of wiring in here.
0:23:49   Poundstone:  It certainly is, John.  That module contains 512 cores and over a half a mile of wiring.  And it performs the function of storing over 65,000 individual pieces of information.
0:24:03   Fitch:  Tell me, you put that potting compound all over this too?
0:24:06   Poundstone:  Yes.  Now in the final form here's the module potted and it's all ready to be plugged into the memory tray assembly.
0:24:15   Fitch:  Tell me, how do you connect one module to the next one in these trays?
0:24:19   Poundstone:  Well that's done on the back side of the tray.  Let me show you.
0:24:25   Fitch:  Oh, I see.
0:24:27   Poundstone:  Now here you see a fairly complex wiring pattern.  We’re able to interconnect from module to module by running wires from this pin to, say, that pin.  Now this pattern is so complex that we've used a computer program to determine the exact layout of each wire.  That is, we may run a wire from here to here by going down this way and over here to there.
0:24:51   Fitch:  Why is that?
0:24:53   Poundstone:  Well, that's to avoid a density problem where the wires could build up if we laid them all in the same channel.
0:24:58   Fitch:  Oh, I see.  But I should think that'd make it rather hard for somebody is trying to wire from one pin to another to remember all that.
0:25:02   Chapter 6.
0:25:04   Poundstone:  Well that's true.  In fact the wiring is so complex that a human being just can't do it, so we use a machine to do all of this wiring.
0:25:14   Poundstone:  This is the automatic wire-wrap machine. The operator has placed the tray in the machine and is starting the wiring operation.  Now this machine has two wire-wrap tools that can be incremented to the proper location on the tray.  When it's found the right pins, the wire is stretched out and formed in the right pattern, then the insulation is stripped from the ends of the wire, and finally the two tools drop down and wrap two pins simultaneously.
0:25:45   Fitch:  Can you go around corners and things?
0:25:46   Poundstone:  Yes you can.  And in order to run the wire in a different direction, sometimes the tray is rotated.  It can be positioned in four different locations.  Now the information to command those wire-wrap tools is contained on these IBM cards.  Each card has the information for a single wire.
0:26:12   Fitch:  How is the wire actually fastened to the pin?  Is it soldered or welded?
0:26:16   Poundstone:  No, this is what is known as a wire-wrap connection.  The soft copper wire is very tightly wrapped around the pin, and you might see that the pin is a square-cornered pin, and in this fashion the wire digs in to the sharp corners of the pin and provides a good electrical connection.
0:26:35   Poundstone:  Now we're entering the computer system test area, John.  After the trays have been potted and the modules assembled to the trays, we bring the machine into this area and run through exhaustive temperature tests and vibration tests.
0:26:49   Fitch:  I see.
0:26:50   Poundstone:  Then finally we must perform a complete electrical checkout of the computer.  Now this piece of equipment is the computer test set.  This provides a means to enter data into the machine and monitor all of the various outputs.  Here we have a piece of equipment that provides the power and interconnects the computer to the two display and keyboards.
0:27:12   Fitch:  Now what kind of tests would you perform on it?
0:27:15   Poundstone:  Well actually, we’ve written a very special fixed-memory program that allows the machine to test itself.  As an example, we can have the machine test that all the possible displays can be created.  Let me show you.
0:27:35   Poundstone:  Now as I enter that, you see that the displays go from all nines, to all eights, and so forth down the line.
0:27:43   Fitch:  Now is this the last time that the computer is tested before it actually is flown?
0:27:47   Poundstone:  No, the computer will be tested several times as part of the guidance and navigation system.  In fact, the same type of equipment that we have here will be used for these various tests.
0:27:58   Fitch:  Thank you very much, Mr Poundstone.
0:28:01   Fitch:  Today we visited the Instrumentation Laboratory at MIT, and the Raytheon Company in Waltham, Massachusetts.  I'm John Fitch, MIT Science Reporter.
0:28:14   Science Reporter
0:28:18   Computer For Apollo   
0:28:23   Reporter:  John Fitch, MIT
0:28:27   [Interviewees:]
   Eldon Hall
   Ramon Alonso
   Albert Hopkins
   Jack Poundstone
0:28:31   Produced for NASA, The National Aeronautics and Space Administration
0:28:36   A presentation of the Massachusetts Institute of Technology.
0:28:40   In association with WGBH-TV Boston
0:28:43   Produced and directed by Russell Morash
0:28:48   Research:  Arnold Behre
   Assistant Director:  Peter Downey
   Production Assistant:  Ellen Cabot
0:28:52   Lighting:  Kenneth Anderson
   Audio:  Donald Bullen
   Video:  Stephen Rogers
   Videotape:  Patrick Kane
   Engineering Supervisor:  John Kean
0:28:56   Aerial Photograph Courtesy of :  Aerial Photos of New England
0:29:00   Chapter 7.
0:29:01   Science Reporter
0:29:03   End


I can email the typescript in Open Document Text format (.odt) to anyone who PMs me with an email address.
« Last Edit: January 08, 2019, 02:57:29 AM by Kiwi »
Don't criticize what you can't understand. — Bob Dylan, “The Times They Are A-Changin'” (1963)
Some people think they are thinking when they are really rearranging their prejudices and superstitions. — Edward R. Murrow (1908–65)

Offline JayUtah

  • Neptune
  • ****
  • Posts: 3099
    • Clavius
Re: Restoration of an AGC
« Reply #4 on: January 08, 2019, 09:10:15 AM »
Indeed, I mentioned this in the hoax thread that raged for a while briefly last month.  The guy who posted the series has made quite a lot of videos on vintage computing, all of which are fascinating if (like me) these were some of the computers you first used in your career.
"Facts are stubborn things." --John Adams